United Kingdom

The Barry Hydrogen Project will support the green hydrogen sector by producing and supplying green hydrogen for the decarbonisation of industrial operations around the Port of Barry. This strategic location, owned by Associated British Ports, has recently been designated as the site for the development of the Clean Growth Hub, aligning the collective vision of for sustainable growth and future across the Port of Barry.

Client
Eni
Industry
Carbon Capture and Storage
Location
United Kingdom
Services
HAZID
ENVID
HAZOP
SIL Classification (via Risk Graph)
SIMOPS
Project Risk Assessment
Year
2024
Client
  • Hynamics
Industry
  • Hydrogen
Location
  • United Kingdom
Services
  • CDM 2015
  • FMEA
  • HAZID
  • HSE Design Philosophy
  • HSE Management Plan
  • Quantitative Risk Assessment
  • Reliability Availability and Maintainability Study
  • Technical Safety Design
Year
  • 2025

The challenge

To address potential risks and hazards associated with the project during the Front End Engineering Design (FEED) phase, Process Risk Consulting were commissioned to facilitate the Project Risk Assessment, Hazard Identification (HAZID), Environmental Identification (ENVID), Simultaneous Operations (SIMOPS), Hazard and Operability (HAZOP) and Safety Integrity Level (SIL) Allocation Workshops , in line with ENI Guidelines for the Protos pipeline and associated facilities.

The scope of workshop included all of the onshore transport and storage facilities including several onshore pipelines and Above Ground Installations (AGI’s).

Tees Green Hydrogen is a collaboration between Hynamics and EDF Renewables. In its initial phase, the electrolyser will have upto 10MW capacity to generate hydrogen for the offtaker.

Client
Eni
Industry
Carbon Capture and Storage
Location
United Kingdom
Services
HAZID
ENVID
HAZOP
SIL Classification (via Risk Graph)
SIMOPS
Project Risk Assessment
Year
2024
Client
  • EDF Renewables
  • Hynamics
Industry
  • Hydrogen
Location
  • United Kingdom
Services
  • Environmental Permitting
  • Hazardous Substances Consent
  • Project Management Consultant
Year
  • 2025

The challenge

To address potential risks and hazards associated with the project during the Front End Engineering Design (FEED) phase, Process Risk Consulting were commissioned to facilitate the Project Risk Assessment, Hazard Identification (HAZID), Environmental Identification (ENVID), Simultaneous Operations (SIMOPS), Hazard and Operability (HAZOP) and Safety Integrity Level (SIL) Allocation Workshops , in line with ENI Guidelines for the Protos pipeline and associated facilities.

The scope of workshop included all of the onshore transport and storage facilities including several onshore pipelines and Above Ground Installations (AGI’s).

As part of the HyNet North West Low Carbon Project, Eni will develop and operate offshore and onshore transportation and storage of CO2 captured from industrial sites in Northwest England at the Liverpool Bay offshore oil and gas facilities in line with its mission to transition towards a low-carbon future.Â

The Protos pipeline is one of several pipelines being installed as part of the Carbon Capture network.

Client
Eni
Industry
Carbon Capture and Storage
Location
United Kingdom
Services
HAZID
ENVID
HAZOP
SIL Classification (via Risk Graph)
SIMOPS
Project Risk Assessment
Year
2024
Client
  • Eni
Industry
  • Carbon Capture and Storage
Location
  • United Kingdom
Services
  • ENVID
  • HAZID
  • HAZOP
  • Project Risk Assessment
  • SIL Classification (via Risk Graph)
  • SIMOPS
Year
  • 2024

The challenge

To address potential risks and hazards associated with the project during the Front End Engineering Design (FEED) phase, Process Risk Consulting were commissioned to facilitate the Project Risk Assessment, Hazard Identification (HAZID), Environmental Identification (ENVID), Simultaneous Operations (SIMOPS), Hazard and Operability (HAZOP) and Safety Integrity Level (SIL) Allocation Workshops , in line with ENI Guidelines for the Protos pipeline and associated facilities.

The scope of workshop included all of the onshore transport and storage facilities including several onshore pipelines and Above Ground Installations (AGI’s).

As part of the HyNet North West Low Carbon Project, Eni will develop and operate offshore and onshore transportation and storage of CO2 captured from industrial sites in Northwest England at the Liverpool Bay offshore oil and gas facilities in line with its mission to transition towards a low-carbon future.Â

The Runcorn pipeline is one of several pipelines being installed as part of the Carbon Capture network.

Client
Eni
Industry
Carbon Capture and Storage
Location
United Kingdom
Services
HAZID
ENVID
HAZOP
SIL Classification (via Risk Graph)
SIMOPS
Project Risk Assessment
Year
2024
Client
  • Eni
Industry
  • Carbon Capture and Storage
Location
  • United Kingdom
Services
  • ENVID
  • HAZID
  • HAZOP
  • Project Risk Assessment
  • SIL Classification (via Risk Graph)
  • SIMOPS
Year
  • 2024

The challenge

To address potential risks and hazards associated with the project during the Front End Engineering Design (FEED) phase, Process Risk Consulting were commissioned to facilitate the Project Risk Assessment, Hazard Identification (HAZID), Environmental Identification (ENVID), Simultaneous Operations (SIMOPS), Hazard and Operability (HAZOP) and Safety Integrity Level (SIL) Allocation Workshops , in line with ENI Guidelines for the Runcorn pipeline and associated facilities.

The scope of workshop included all of the onshore transport and storage facilities including several onshore pipelines and Above Ground Installations (AGI’s).

Associated British Ports (ABP) is seeking to construct, operate and maintain the Immingham Green Energy Terminal (IGET) – a new multi-user liquid bulk green energy terminal located on the eastern side of the Port of Immingham – the first of its kind in the world.

Air Products would be the first customer to use the new facility for the production of green hydrogen alongside a second operator for the filling of Carbon Dioxide onto vessels to be injected into offshore wells.

Client
Associated British Ports
Industry
Carbon Capture and Storage

Ammonia Cracking to Hydrogen

Marine
Location
United Kingdom
Services
EERA

HSE Designers Legislation Review

HSE Management Plan

HSE Design Philosophy
Year
2024
Client
  • Associated British Ports
Industry
  • Ammonia Cracking to Hydrogen
  • Carbon Capture and Storage
  • Marine
Location
  • United Kingdom
Services
  • EERA
  • HSE Design Philosophy
  • HSE Designers Legislation Review
  • HSE Management Plan
Year
  • 2024

The challenge

Following on from their input during RIBA 2, Process Risk Consulting were commissioned to provide independent Technical Safety Design input into the design of the berth ensuring that the design is in accordance with relevant local and end-user requirements for the RIBA 3 phase of the project.

Process Risk Consulting developed the following deliverables during the RIBA 3 phase of the project:

  • HSE Designer’s Legislation Review
  • HSE Designer’s Management Plan
  • HSE Design Philosophy
  • Escape, Evacuation and Rescue Analysis

In addition to the above, Process Risk Consulting also contributed towards other design developments, workshops (i.e. Human Factors Engineering) and preparing the specification for additional works to be conducted during the Engineering, Procurement and Construction (EPC) phase of the project.

As part of the UK’s target to reach net-zero, e-Alto aims to produce Sustainable Aviation Fuel (SAF) from carbon dioxide and hydrogen made using renewable (decarbonised) electricity.

Client
Velocys
Industry
Sustainable Aviation Fuel
Location
United Kingdom
Services
HAZID
ENVID
Bowtie
MAH Register
Year
2024
Client
  • Velocys
Industry
  • Sustainable Aviation Fuel
Location
  • United Kingdom
Services
  • Bowtie
  • ENVID
  • HAZID
  • MAH Register
Year
  • 2024

The challenge

To address potential risks and hazards associated with the First of A Kind (FOAK) project during the Pre Front End Engineering Design (Pre-FEED) phase, Process Risk Consulting were commissioned to facilitate a Hazard Identification (HAZID) and Environmental Identification (ENVID) Workshops.

The scope of workshop included tie-ins with suppliers of Hydrogen, Carbon Dioxide (CO2) and raw water along with specialised vendor processes such as Fischer-Tropsch.

In addition to this, Process Risk Consulting prepared a Bowtie of the various hazards associated with Hydrogen and CO2 for the facility to visually represent the hazards and mitigations.

Using the outputs of the HAZID, ENVID and Bowtie studies, Process Risk Consulting prepared a Major Accident Hazards (MAH) register to allow designers of the next phase of the project to clearly identify what the MAH associated with the facility are and the required protections they would need to consider within the design.

As part of the HyNet North West Low Carbon Project, Eni will develop and operate offshore and onshore transportation and storage of CO2 captured from industrial sites in Northwest England at the Liverpool Bay offshore oil and gas facilities in line with its mission to transition towards a low-carbon future.

Client
Eni
Industry
Carbon Capture and Storage
Location
United Kingdom
Services
HAZID
ENVID
HAZOP
SIL Classification (via Risk Graph)
SIMOPS
Project Risk Assessment
Year
2024
Client
  • Eni
Industry
  • Carbon Capture and Storage
Location
  • United Kingdom
Services
  • ENVID
  • HAZID
  • HAZOP
  • Project Risk Assessment
  • SIL Classification (via Risk Graph)
  • SIMOPS
Year
  • 2024

The challenge

To address potential risks and hazards associated with the project during the Front End Engineering Design (FEED) phase, Process Risk Consulting were commissioned to facilitate the Project Risk Assessment, Hazard Identification (HAZID), Environmental Identification (ENVID), Simultaneous Operations (SIMOPS), Hazard and Operability (HAZOP) and Safety Integrity Level (SIL) Allocation Workshops , in line with ENI Guidelines for the Padeswood pipeline and associated facilities.

The scope of workshop included all of the onshore transport and storage facilities including several onshore pipelines and Above Ground Installations (AGI’s).

KLA plans to build a new Research and Development (R&D) laboratory and manufacturing facility for semiconductors to meet increased demand.

Client
Saudi Aramco
Industry
Offshore Oil and Gas
Location
Saudi Arabia
Services
HAZID
HAZOP
LOPA
Year
2024
Client
  • KLA
Industry
  • Semiconductor
Location
  • United Kingdom
Services
  • LOPA
Year
  • 2023

The challenge

To address potential risks and hazards associated with the project during the RIBA 4 phase of the project, Process Risk Consulting were commissioned to conduct the Safety Integrity Level (SIL) Allocation study using the Layers of Protection Analysis (LOPA) methodology for the Safety Instrumented Functions (SIF’s) used as part of the manufacturing process of the semiconductors.

The Altalto project’s aim is to deliver a commercial waste-to-SAF plant in Immingham, UK. The plant is expected to make 300,000 tonnes of SAF per year.

Client
Velocys
Industry
Sustainable Aviation Fuel
Location
United Kingdom
Services
HAZID
ENVID
Bowtie
MAH Register
Year
2024
Client
  • Velocys
Industry
  • Sustainable Aviation Fuel
  • Waste to Energy
Location
  • United Kingdom
Services
  • Technical Safety Design
Year
  • 2023

The challenge

Process Risk Consulting were commissioned to assist the Front End Engineering Design (FEED) team as a Technical Safety Design Subject Matter Expert (SME) to provide a thorough review of project deliverables, mainly the Piping and Instrumentation Diagrams (P&ID’s) to ensure that a safe philosophy has been implemented within the design.

The project will see CO2 from enfinium’s flagship Ferrybridge, West Yorkshire incinerator captured and transported to Navigator’s Teesside storage facility which will then be transported offshore for permanent storage.

Client
  • Navigator Terminals
Industry
  • Carbon Capture and Storage
Location
  • United Kingdom
Services
  • ENVID
  • HAZID
Year
  • 2023

The challenge

To address potential risks for the first of a kind transport of Carbon Dioxide, Process Risk Consulting were commissioned to chair a Hazard Identification (HAZID) and Environmental Identification (ENVID) workshop for the project to cover the entire scope from emitter take-off to connection with the downstream operators injection pipeline in order to identify potential hazards, ensuring that they are suitably protected and mitigated.